In any type of ultra clear and fine line indication at different work distances, not limited by high height, long distance and other complex working environments etc, it should be a quite nice solution for users to operate a middle wavelength made device of a 532nm green laser line generator. It applies advanced 532nm green DPSS laser tech and qualified optic lens with wide fan angles, cooperating with a high duration metal housing tube, this industrial stabilized 532nm green laser module makes sure of high quality green laser light source emission,ultra clear and fine green line projection for all precise machinery processing works constantly.

The real line alignment work with a 532nm green laser line generator should be working for a quite long time, thus it is major part to maintain its stable and reliable line projection from laser beam aperture. It is applying a metal heat sink cooling system inside a highly durable anodized aluminum alloy housing tube. When it gets wide range output power of 5mW to 100mW, after its adoption of 16mm and 26mm diameter tube design, after leaving enough space for tube cooling down, this 532nm green laser module is working well with good thermal emitting and thermal conductivity. Once it makes continuous green line alignment within 10 hours per day, it still maintains its ultra stable and reliable green line projection for both of long time and long lasting use.

Cooperating with high quality glass coated lens within wide fan angles of 10 to 110 degree, in order to avoid laser light decay or dim in continuous use, this 532nm green laser line generator passes through quite strict laser beam stability test and aging preventing test up to 24 hours. When it makes proper use by skilled users or professionals, after its continuous line indication within 10 hours per day, it is able to achieves up to 85% laser beam stability and long lasting line indication for a lot of industrial and high tech precise machinery processing works.

Being made with 16mm and 26mm diameter tube design for wide range output power of 5mW to 100mW, this 532nm green laser line generator enables quite easy reaching and no barrier green line projection onto any vertical or horizontal surface. It brings users the best direction and the easiest reaching of green line projection for all machinery processing works. For the most important of all, after the use of a high power green alignment laser up to 50mW to 100mW for long distance users, users should take active laser safety measures and wear correct laser safety glasses until achieving easy, free and no danger use effectively.

In those of industrial and high tech precise line measuring work fields, not simply relying on prior line drawing, it should be a much better solution to operate a Berlinlasers 532nm green laser line generator. The unique use of a metal heat sink cooling system is configured with 16mm and 26mm diameter metal housing tube, which brings users easy reaching, long lasting and highly stable green line projection effectively.
This laser line generator applies a qualified glass coated lens within 10 to 110 degree.Under operation with basic learning of required line length, line fineness and work distance, it should be selected with correct output power and optic lens fan angle. Within long extending distance of 25 meters and high lighting working occasion, it brings users quite satisfied line positioning results for a lot of raw material processing works.
Applications: laser cutting, saw mill, lumber machine, laser car wheel alignment, military targeting and textile garment processing etc 

Once you are falling into serious need of long lasting and long distance line generation at a quite long work distance, it might be far more enough than your hand reaching. However, it is not any longer a hard job for users until selecting a quite practical used device, such as a 532nm green laser line generator. Among all kinds of visible laser devices, it gets the advanced use of a middle wavelength among visible optical spectrum. as a result, once it gets the lowest laser bean divergence and the most special TEM00 laser beam mode, the finished product of 532nm green laser module has just assured the best quality green laser light source emission and the most precise green reference line indication on multiple working surfaces effectively.
In process of continuous line positioning work, 532nm green laser line generator should have to work with stable and reliable performance as expected. The unique use of a metal heat sink cooling system just gets even better thermal emitting than air or water cooling. It is getting wide range output power of 5mW to 100mW. After configuration with high duration anodized aluminum alloy housing tube, this 532nm green laser module just adopts different dimension tube diameter design of 16mm and 26mm. When it gets enough space leaving for tube cooling down, after its continuous line generation work within ten hours per day, it just achieves enough space and time for tube cooling down and enables highly reliable green line indication on to multiple raw material surfaces effectively. 
The usual use of a qualified glass coated Lens enables freely selected fan angles within 10 to 110 degrees. Under operation with a series of strict laser beam stability and aging preventing test up to 24 hours, this 532nm green laser line generator is achieving high level of laser light cycling use and highly reliable green line projection within daily operating time of ten hours per day. It projects has different line lengths within 0.5 to 6 meters in continuous use. It is just a necessity for users to get basic measurement and experiment of required technical data. Within the maximum work distance of 25 meters and other multiple highlighting working occasions, only after its correct use of output power and optic lens fan angle, this 532nm green laser module is providing users excellent line positioning results for multiple fields including guideline for laser cutting, saw mill, lumber machine, laser car wheel alignment, military targeting and high Tech work, etc.
According to the easy use of laser alignment mounting bracket, together with electric wires extension for both 532nm green laser line generator and DC power supply, it always enables the most convenient installation and the easiest reaching of green line source onto any vertical or horizontal work surface. It makes sure of non contact, no mistake and low cost line positioning results. As a result, once it gets high power up to 50mW to 100mW, it is just a necessity to pay high attention to laser safety issues and wear correct laser safety glasses until achieving easy and secured alignment laser generation on all occasions effectively.