:3

Tagged with "alignment laser"
Highly Precise Use of DC Power 5mW to 100mW Pro Red Line Laser Alignment
Category: Stories
Tags: red line laser alignment alignment laser

Whenever line projection work is processing at a longer distance than formal hand reaching, it makes an efficient job with a Berlinlasers pro red line laser alignment. It gets wide range output power of 5mW to 100mW. Employed by an inner part of import red laser diode and thermal emitting system inside a high duration anodized aluminum alloy housing tube, it achieves excellent thermal emitting and increasing stability red line projection in long lasting use.
This red alignment laser applies different dimension tube diameter of 16mm and 26mm, within freely installed distance of 3 meters, it makes easy reaching and no barrier red line indication onto any raw material surface. It should only be selected with correct output power and optic lens fan angle. Within wide fan angles of 10 to 110 degree, after projection of high linear quality red line within 0.5 meter to 6 meters lengths, it brings users the best line aligning results for all industrial and high tech fields effectively.
Applications: industrial device manufacturing, guideline for laser cutting, saw mill, lumber machine, textile garment processing and high tech

 

How to make a reliable use of 532nm green laser line generator?
Category: Stories
Tags: 532nm green laser line generator laser line generator 532nm green laser module alignment laser laser safety glasses

Once you are falling into serious need of long lasting and long distance line generation at a quite long work distance, it might be far more enough than your hand reaching. However, it is not any longer a hard job for users until selecting a quite practical used device, such as a 532nm green laser line generator. Among all kinds of visible laser devices, it gets the advanced use of a middle wavelength among visible optical spectrum. as a result, once it gets the lowest laser bean divergence and the most special TEM00 laser beam mode, the finished product of 532nm green laser module has just assured the best quality green laser light source emission and the most precise green reference line indication on multiple working surfaces effectively.
In process of continuous line positioning work, 532nm green laser line generator should have to work with stable and reliable performance as expected. The unique use of a metal heat sink cooling system just gets even better thermal emitting than air or water cooling. It is getting wide range output power of 5mW to 100mW. After configuration with high duration anodized aluminum alloy housing tube, this 532nm green laser module just adopts different dimension tube diameter design of 16mm and 26mm. When it gets enough space leaving for tube cooling down, after its continuous line generation work within ten hours per day, it just achieves enough space and time for tube cooling down and enables highly reliable green line indication on to multiple raw material surfaces effectively. 
The usual use of a qualified glass coated Lens enables freely selected fan angles within 10 to 110 degrees. Under operation with a series of strict laser beam stability and aging preventing test up to 24 hours, this 532nm green laser line generator is achieving high level of laser light cycling use and highly reliable green line projection within daily operating time of ten hours per day. It projects has different line lengths within 0.5 to 6 meters in continuous use. It is just a necessity for users to get basic measurement and experiment of required technical data. Within the maximum work distance of 25 meters and other multiple highlighting working occasions, only after its correct use of output power and optic lens fan angle, this 532nm green laser module is providing users excellent line positioning results for multiple fields including guideline for laser cutting, saw mill, lumber machine, laser car wheel alignment, military targeting and high Tech work, etc.
According to the easy use of laser alignment mounting bracket, together with electric wires extension for both 532nm green laser line generator and DC power supply, it always enables the most convenient installation and the easiest reaching of green line source onto any vertical or horizontal work surface. It makes sure of non contact, no mistake and low cost line positioning results. As a result, once it gets high power up to 50mW to 100mW, it is just a necessity to pay high attention to laser safety issues and wear correct laser safety glasses until achieving easy and secured alignment laser generation on all occasions effectively.

 

How can 650nm 5mW to 100mW red laser diode module work continuously?
Category: Stories
Tags: 650nm red laser diode module laser diode module alignment laser

When you are making a decision to make continuous dot indication with a 650nm red laser diode module, no matter it is pointing at a close or long distance, it is always making a good job for users to operate a highly bright beam emitting tool. Only if it gets constant power source supply and basic use of thermal emitting system, after its easy installation and adjustment to correct position, this 650nm red dot laser has just brought users easy reaching, good direction and high precision red dot indication onto different working surfaces. It just brings users no barrier, no mistake and long lasting dot projection in all occasion effectively.
Being made with an import 650nm red laser diode within 5mW to 100mW, cooperating with a metal heat sink cooling system, this 650nm red laser diode module always gets increasing laser beam stability of at least 40% in continuous use. When it is pointing onto different work distances, it just gets wide range output power. Cooperating with basic use of thermal emitting system, this direct d emission made 650nm red dot laser has just got excellent thermal emitting and highly reliable red dot projection in continuous use. It just allows long lasting red dot projection within ten hours per day. Once it gets high levels of laser light cycling use, it just provided users highly clear and reliable dot indication for all kinds of raw material processing works effectively.
After the use of a qualified glass coated Lens and a glass window in front part of 650nm red laser diode module tube, it is working well with excellent performance, which gets no effect by moisture or dust as well. Once it projects high transmittance and high density red laser light source emission from the laser beam aperture, besides the use of highly clear dot projection at close distance, this red dot laser with high power up to 50mW to 100mW also makes a good job for high precision dot indication as long as 25 meters and any other formal lighting working occasion.
Owing to the most special use of ACC, APC driving circuit board design, within wide range output power of 5mW to 100Mw, this 650nm red laser diode module is working well with constant output power and electric current supply. It always gets no effect by increasing temperature and serious electric current impact as well. After selecting with correct output power and proper installation onto different machine or device, once it gets freely adjusted red dot diameter and dot emitting direction, this alignment laser enables highly concentrated red laser light source emission and increasing accuracy red dot projection at a greater distance. Users should only pay high attention to laser safety issues and wear correct laser safety goggles until achieving easy and secured dot indication in long lasting used effectively.

 

Next
1 2 3 4
RSS
3

This website is powered by Spruz