In those of industrial and high tech precise line measuring work fields, not simply relying on prior line drawing, it should be a much better solution to operate a Berlinlasers 532nm green laser line generator. The unique use of a metal heat sink cooling system is configured with 16mm and 26mm diameter metal housing tube, which brings users easy reaching, long lasting and highly stable green line projection effectively.
This laser line generator applies a qualified glass coated lens within 10 to 110 degree.Under operation with basic learning of required line length, line fineness and work distance, it should be selected with correct output power and optic lens fan angle. Within long extending distance of 25 meters and high lighting working occasion, it brings users quite satisfied line positioning results for a lot of raw material processing works.
Applications: laser cutting, saw mill, lumber machine, laser car wheel alignment, military targeting and textile garment processing etc 

Once you are falling into serious need of long lasting and long distance line generation at a quite long work distance, it might be far more enough than your hand reaching. However, it is not any longer a hard job for users until selecting a quite practical used device, such as a 532nm green laser line generator. Among all kinds of visible laser devices, it gets the advanced use of a middle wavelength among visible optical spectrum. as a result, once it gets the lowest laser bean divergence and the most special TEM00 laser beam mode, the finished product of 532nm green laser module has just assured the best quality green laser light source emission and the most precise green reference line indication on multiple working surfaces effectively.
In process of continuous line positioning work, 532nm green laser line generator should have to work with stable and reliable performance as expected. The unique use of a metal heat sink cooling system just gets even better thermal emitting than air or water cooling. It is getting wide range output power of 5mW to 100mW. After configuration with high duration anodized aluminum alloy housing tube, this 532nm green laser module just adopts different dimension tube diameter design of 16mm and 26mm. When it gets enough space leaving for tube cooling down, after its continuous line generation work within ten hours per day, it just achieves enough space and time for tube cooling down and enables highly reliable green line indication on to multiple raw material surfaces effectively. 
The usual use of a qualified glass coated Lens enables freely selected fan angles within 10 to 110 degrees. Under operation with a series of strict laser beam stability and aging preventing test up to 24 hours, this 532nm green laser line generator is achieving high level of laser light cycling use and highly reliable green line projection within daily operating time of ten hours per day. It projects has different line lengths within 0.5 to 6 meters in continuous use. It is just a necessity for users to get basic measurement and experiment of required technical data. Within the maximum work distance of 25 meters and other multiple highlighting working occasions, only after its correct use of output power and optic lens fan angle, this 532nm green laser module is providing users excellent line positioning results for multiple fields including guideline for laser cutting, saw mill, lumber machine, laser car wheel alignment, military targeting and high Tech work, etc.
According to the easy use of laser alignment mounting bracket, together with electric wires extension for both 532nm green laser line generator and DC power supply, it always enables the most convenient installation and the easiest reaching of green line source onto any vertical or horizontal work surface. It makes sure of non contact, no mistake and low cost line positioning results. As a result, once it gets high power up to 50mW to 100mW, it is just a necessity to pay high attention to laser safety issues and wear correct laser safety glasses until achieving easy and secured alignment laser generation on all occasions effectively.

Unless the use of any prior line drawing or line printing works, on consideration of high work efficiency and high accuracy line generation onto different working surfaces, it should be a quite nice solution for users to have a try of a 532nm green laser line generator. It keeps works with intense and visible green laser beam emission from a middle wavelength 532nm green DPSS laser system, under condition that it gets quite low laser beam divergence and special laser beam mode of TEM00, no matter what kind of working surface it is pointing, the 532nm green laser module is working well with ultra fine and straight green line indication on a lot of work surfaces effectively.
The usual use of a 532nm green laser line generator is always working for a quite long time. The basic adoption of a metal heat sink cooling system is configured with different dimension metal housing tube. Whatever kind of working service it is pointing, it is obtaining good thermal emitting and thermal stabilization. The practical laser line alignment work has just assured highly stable performance within daily operating time of ten hours per day. It just achieves the high level of laser light cycling use and highly reliable green line indication for multiple application fields.
Under operation as an accessory part of any other machine or device, not seriously limited by long distance or high height, or other hard reaching places, this 532nm green laser line generator gets ultra compact and durable tube design, which enables easy installation and quick reaching of green line source indication onto any vertical or horizontal work surface. It makes sure of long lasting, no barrier and no mistake use for all raw material processing works.
For the most important of all, under operation of clear line indication at quite long work distance and highlighting, it is a necessity for users to pay high attention to laser safety issue. After correct wearing of laser safety glasses and avoiding any eye exposure to beam aperture, without any worrying about laser safety issue, this industrial alignment laser just brings the users easy, secured and long lasting line indication for all occasions effectively