In any type of high precision and high stability dot alignment, it should be the most preferred job for users top operate a Berlinlasers 650nm red dot laser module. It keeps work with intense red laser beam emission from a 650nm red laser diode within 5mW to 100mW. The basic use of a metal heat sink cooling system is configured with 16mm and 26mm diameter anodized aluminum alloy housing tube, it enables easy carrying, good thermal emitting and highly reliable red dot alignment in long lasting use. 
Owing to the special use of APC, ACC driving circuit board, available with wide range output power of 5mW to 100mW, this 650nm red dot laser module is performing well with constant output power and electric current supply. It gets reduced possibility of tube burning out or damage. According to correct use of output power and proper adjustment of red dot diameter, it is able to provide users excellent dot aligning solution for all precise device manufacturing work fields effectively.
Applications: drilling system, laser marking, laser engraving, red laser sight, laser medical therapy and treatment, high tech etc

In any type of highly precise and clear dot indication at different work distances, not easy to reach with a simple laser pointer, it makes a better job with a Berlinlasers 650nm red laser diode module. Employed by an import 650nm red laser diode, cooperating with good cooling system inside 16mm and 26mm diameter metal housing tube, it just enables easy carrying, good thermal emitting performance in long lasting dot alignment use. 
Owing to the special use of a qualified glass coated lens and glass window, this laser diode module is bearing any harsh working occasion of moisture or dust as well. It generates high density red laser light and ultra clear red dot alignment as long as 25 meters. Once it gets freely installed distance of 3 meters, not any longer limited by long distance, high height or other hard reaching places etc, it just makes no mistake and no barrier dot alignment for all application fields.
Applications: laser marking, laser engraving, drilling system, red laser sight, laser medical therapy and high tech etc

Once you are falling into serious need of long lasting and long distance line generation at a quite long work distance, it might be far more enough than your hand reaching. However, it is not any longer a hard job for users until selecting a quite practical used device, such as a 532nm green laser line generator. Among all kinds of visible laser devices, it gets the advanced use of a middle wavelength among visible optical spectrum. as a result, once it gets the lowest laser bean divergence and the most special TEM00 laser beam mode, the finished product of 532nm green laser module has just assured the best quality green laser light source emission and the most precise green reference line indication on multiple working surfaces effectively.
In process of continuous line positioning work, 532nm green laser line generator should have to work with stable and reliable performance as expected. The unique use of a metal heat sink cooling system just gets even better thermal emitting than air or water cooling. It is getting wide range output power of 5mW to 100mW. After configuration with high duration anodized aluminum alloy housing tube, this 532nm green laser module just adopts different dimension tube diameter design of 16mm and 26mm. When it gets enough space leaving for tube cooling down, after its continuous line generation work within ten hours per day, it just achieves enough space and time for tube cooling down and enables highly reliable green line indication on to multiple raw material surfaces effectively. 
The usual use of a qualified glass coated Lens enables freely selected fan angles within 10 to 110 degrees. Under operation with a series of strict laser beam stability and aging preventing test up to 24 hours, this 532nm green laser line generator is achieving high level of laser light cycling use and highly reliable green line projection within daily operating time of ten hours per day. It projects has different line lengths within 0.5 to 6 meters in continuous use. It is just a necessity for users to get basic measurement and experiment of required technical data. Within the maximum work distance of 25 meters and other multiple highlighting working occasions, only after its correct use of output power and optic lens fan angle, this 532nm green laser module is providing users excellent line positioning results for multiple fields including guideline for laser cutting, saw mill, lumber machine, laser car wheel alignment, military targeting and high Tech work, etc.
According to the easy use of laser alignment mounting bracket, together with electric wires extension for both 532nm green laser line generator and DC power supply, it always enables the most convenient installation and the easiest reaching of green line source onto any vertical or horizontal work surface. It makes sure of non contact, no mistake and low cost line positioning results. As a result, once it gets high power up to 50mW to 100mW, it is just a necessity to pay high attention to laser safety issues and wear correct laser safety glasses until achieving easy and secured alignment laser generation on all occasions effectively.