Unless the use of any prior line drawing or line printing works, on consideration of high work efficiency and high accuracy line generation onto different working surfaces, it should be a quite nice solution for users to have a try of a 532nm green laser line generator. It keeps works with intense and visible green laser beam emission from a middle wavelength 532nm green DPSS laser system, under condition that it gets quite low laser beam divergence and special laser beam mode of TEM00, no matter what kind of working surface it is pointing, the 532nm green laser module is working well with ultra fine and straight green line indication on a lot of work surfaces effectively.
The usual use of a 532nm green laser line generator is always working for a quite long time. The basic adoption of a metal heat sink cooling system is configured with different dimension metal housing tube. Whatever kind of working service it is pointing, it is obtaining good thermal emitting and thermal stabilization. The practical laser line alignment work has just assured highly stable performance within daily operating time of ten hours per day. It just achieves the high level of laser light cycling use and highly reliable green line indication for multiple application fields.
Under operation as an accessory part of any other machine or device, not seriously limited by long distance or high height, or other hard reaching places, this 532nm green laser line generator gets ultra compact and durable tube design, which enables easy installation and quick reaching of green line source indication onto any vertical or horizontal work surface. It makes sure of long lasting, no barrier and no mistake use for all raw material processing works.
For the most important of all, under operation of clear line indication at quite long work distance and highlighting, it is a necessity for users to pay high attention to laser safety issue. After correct wearing of laser safety glasses and avoiding any eye exposure to beam aperture, without any worrying about laser safety issue, this industrial alignment laser just brings the users easy, secured and long lasting line indication for all occasions effectively

What is the best solution for you to make clear and fine enough line indication? It might be processing at different work distances and other hard reaching places. Those of primary use of manual or mechanical alignment tools are far enough to reach. As a result, under constant technical innovation of 532nm green DPSS laser system and a qualified glass coated lens with wide fan angles, it consists of a 532nm green laser line generator. Under conditions that it makes constant power supply and proper installation onto any other machine or device, this 532nm green laser module just makes sure of extremely clear and fine green line indication at various work distances effectively.
The genuine line alignment work with a 532nm green laser line generator would be working for a quite long time. From the very beginning use, it is adopting an inner part of a metal heat sink cooling system inside durable anodized aluminum alloy housing tube. Available with wide range output power of 5mW to 100mW, as a result, according to the adoption of 16mm diameter tube for low power range of 5mW to 100mW, and 26mm diameter tube for high power green laser up to 30mW to 100mW, this 532nm green laser module always leaves enough space and time for tube cooling down and achieves the most reliable green laser beam and green reference line generation within daily operating time of ten hours in use.
Being made with a qualified glass coated Lens with wide fan angles of 10 to 110 degrees, whatever kind of working surface it is pointing, owing to its wide range fan angles of 10 to 110 degrees, this 532nm green laser line generator just projects different line lengths within 0.5 to 6 meters in use. It gets the lowest laser bean divergence and the special Tem00 laser beam mode. As a result, no matter line alignment work is processing at close or long distance, this green line laser still keeps works with extremely clear and fine line indication in multiple application fields, covering laser cutting, laser car wheel alignment, sawmill, lumber machine, laser medical therapy, military targeting and high Tech work, etc.
Within freely installed distance of three meters, even though some of working surfaces are not easy to reach, this 532nm green laser line generator still makes sure of the most convenient installation and the easiest reaching of green line source onto any vertical or horizontal work surface. It makes sure of no track, no mistake and long lasting green line indication in continuous use. When it makes proper line generation within the maximum work distance of 25 meters and other high lighting working occasions, after high attention to any thermal energy hurt to human eyes and correct wearing of laser safety glasses, without any an eye exposure to laser beam aperture, this industrial green alignment laser just makes sure of easy and secured green line indication in long lasting use effectively

Whatever kind of working surface users are trying to make clear enough line alignment, it might be processing out of hand reaching, it is always making good job with a 532nm green laser line generator. The advanced use of 532nm green DPSS laser tech assures low laser beam divergence of less than 1mrad and special TEM00 laser beam, which enables high fineness green line projection in continuous use.
Available with wide range output power of 5mW to 100mW, connecting with 5V, 9V 1000mA DC power supply and proper use of thermal emitting system, this 532nm green laser module enables constant green laser beam emission, and highly clear green line projection within long extending distance of 25 meters. Being made with qualified glass coated lens within 10 to 110 degree, only after correct use of optic lens fan angle and freely installed distance of 3 meters, it enables high level of accuracy line measurement for all raw material processing works.
Applications: laser cutting machine, sand milling, lumber machine, textile garment processing and high tech

https://www.berlinlasers.com/532nm-glass-lens-green-laser-line-generator