Either you are trying to make continuous line generation at close a long distance. It should not be easy to reach with line drawing a printing work at all. However under operation with constant technical innovation of red laser the tech and a qualified glass coated Lens with wide fan angles. It's just being made with a quite practically used a line measuring device such as a 635nm red line laser module. It keeps works with highly visible and highly intense red laser beam emission at several miles far away. Owing to the use of a qualified glass coated Lens with wide fan angles and different operating voltage DC power supply, after its easy mounting onto any other machine or device, this laser line generator begins to work with highly precise and clear red line projection onto a lot of working surfaces effectively.
The usual use of a 635nm red line laser module is always continuing for a quite long time and also has to work with stable and reliable performance as expected. The basic adoption of an import 635nm red laser diode gets wide range operating output power within 5mW to 100mW. Besides the use of a metal head sink cooling system, it also adopts different operating voltage of 5V, 9V DC power supply. It projects the most visible red laser beam at several miles far away. In addition, on consideration of high level of accuracy line projection, this laser line generator within wide range output power of 5mW to 100mW has just assured highly clear redline indication for close distance, long distance and other formal lighting working occasions.
According to the use of a qualified glass coated Lens with wide fan angles of 10 to 110 degree, whatever kind of working surface it is pointing, this 635nm red line laser module is working well with highly straight and highly fine red line indication within 0.5 to 6 meters in a large variety of industrial and high Tech precise line positioning work fields. It is a necessity for users to make basic learning of required line length, line fineness and work distance. after its correct selection of both output power and optic less fan angle, it is able to provide users excellent line generation result for multiple precise material guidelines indication, including laser cutting for stone, wood, metal, garment, steel, sawmill, lumber machine, laser car wheel alignment, military targeting and high Tech work etc.
Under operation with electric wires extension for both 635nm red line laser module and DC power supply, within the maximum installed the distance of three meters, it just enables the most convenient installation and the easiest reaching of red line source generation in continuous use. It brings users no mistake, noncontact and long lasting line projection onto any vertical or horizontal work surface. It brings users no mistake, long lasting, and noncontact line projection for all material processing works. On condition that users are paying high attention to laser safety issue and wearing correct laser safety goggles, without any eye exposure to beam aperture part, this industrial alignment laser just brings users easy, secured and perfect line generation perfectly

Whenever line generation work is processing at close a long distance, even though it is far more enough than hand reaching, it still makes a good job for users to operate a highly precise beam emitting device of 635nm red line laser module. It is applicable for those of industrial and high Tech precise line generation work fields. Under operation with constant power source supply and easy connects with DC power supply and easy mounting onto any other industrial devices or equipment, it begins to work with high precision, high fineness and long lasting red line generation onto a lot of working surfaces.
The usual use of a 635nm red line laser module just continues for a quite long time. The basic adoption of a metal heat sink cooling system gets even better thermal inviting performance than formal air or water cooling. When it gets proper use of 16mm and 26mm diameter tube design, only if there is enough space leaving for tube cooling down, it achieves excellent laser light cycling use and highly reliable red line indication within daily operating time of eight to ten hours per day.
Owing to the use of a high quality glass coated Lens and a glass window inside the different dimension metal housing tube, this 635nm red line laser module also gets wide range output power of 5mW to 100mW. Only if there is enough space leaving for tube cooling down and makes continuous line generation within daily operating time of eight to ten hours, this laser line generator has just got high level of laser cycling use and highly reliable red line indication as expected.
According to the adoption of a quite qualified glass coated lens with wide fan angles of 10 to 110 degrees, whatever kind of working surface it is pointing, it always enables wide range for angles of 10 to 110 degrees. It projects highly straight and high quality red line source within 0.5 to 6 meters. Under conditions that users are getting basic learning of required line length and line fineness at different work distances, after its correct use of out power and optic lens fan angle, this accessory part of laser line generator just enabled the easy installation onto any other machine or device, and provides users ideal line alignment solution for laser cutting, saw mill, lumber machine, laser car wheel alignment, laser medical therapy, military targeting and high Tech work, etc.
Under operation of electric wire extension for both 635nm red line laser module and DC power supply, it enables the most convenient installation and the easiest reaching of red line source onto any vertical or horizontal working surface. The special use of laser safety goggles just protect human eyes from the use of high power red alignment laser up to 50mW to 100mW. Anytime users are selecting correct output power and optic Lens fan angle made laser device, it just makes sure of easy and secured line generation in long lasting use effectively.