Whenever line generation work is processing at close a long distance, even though it is far more enough than hand reaching, it still makes a good job for users to operate a highly precise beam emitting device of 635nm red line laser module. It is applicable for those of industrial and high Tech precise line generation work fields. Under operation with constant power source supply and easy connects with DC power supply and easy mounting onto any other industrial devices or equipment, it begins to work with high precision, high fineness and long lasting red line generation onto a lot of working surfaces.
The usual use of a 635nm red line laser module just continues for a quite long time. The basic adoption of a metal heat sink cooling system gets even better thermal inviting performance than formal air or water cooling. When it gets proper use of 16mm and 26mm diameter tube design, only if there is enough space leaving for tube cooling down, it achieves excellent laser light cycling use and highly reliable red line indication within daily operating time of eight to ten hours per day.
Owing to the use of a high quality glass coated Lens and a glass window inside the different dimension metal housing tube, this 635nm red line laser module also gets wide range output power of 5mW to 100mW. Only if there is enough space leaving for tube cooling down and makes continuous line generation within daily operating time of eight to ten hours, this laser line generator has just got high level of laser cycling use and highly reliable red line indication as expected.
According to the adoption of a quite qualified glass coated lens with wide fan angles of 10 to 110 degrees, whatever kind of working surface it is pointing, it always enables wide range for angles of 10 to 110 degrees. It projects highly straight and high quality red line source within 0.5 to 6 meters. Under conditions that users are getting basic learning of required line length and line fineness at different work distances, after its correct use of out power and optic lens fan angle, this accessory part of laser line generator just enabled the easy installation onto any other machine or device, and provides users ideal line alignment solution for laser cutting, saw mill, lumber machine, laser car wheel alignment, laser medical therapy, military targeting and high Tech work, etc.
Under operation of electric wire extension for both 635nm red line laser module and DC power supply, it enables the most convenient installation and the easiest reaching of red line source onto any vertical or horizontal working surface. The special use of laser safety goggles just protect human eyes from the use of high power red alignment laser up to 50mW to 100mW. Anytime users are selecting correct output power and optic Lens fan angle made laser device, it just makes sure of easy and secured line generation in long lasting use effectively.

What is the best solution for you to make clear and fine enough line indication? It might be processing at different work distances and other hard reaching places. Those of primary use of manual or mechanical alignment tools are far enough to reach. As a result, under constant technical innovation of 532nm green DPSS laser system and a qualified glass coated lens with wide fan angles, it consists of a 532nm green laser line generator. Under conditions that it makes constant power supply and proper installation onto any other machine or device, this 532nm green laser module just makes sure of extremely clear and fine green line indication at various work distances effectively.
The genuine line alignment work with a 532nm green laser line generator would be working for a quite long time. From the very beginning use, it is adopting an inner part of a metal heat sink cooling system inside durable anodized aluminum alloy housing tube. Available with wide range output power of 5mW to 100mW, as a result, according to the adoption of 16mm diameter tube for low power range of 5mW to 100mW, and 26mm diameter tube for high power green laser up to 30mW to 100mW, this 532nm green laser module always leaves enough space and time for tube cooling down and achieves the most reliable green laser beam and green reference line generation within daily operating time of ten hours in use.
Being made with a qualified glass coated Lens with wide fan angles of 10 to 110 degrees, whatever kind of working surface it is pointing, owing to its wide range fan angles of 10 to 110 degrees, this 532nm green laser line generator just projects different line lengths within 0.5 to 6 meters in use. It gets the lowest laser bean divergence and the special Tem00 laser beam mode. As a result, no matter line alignment work is processing at close or long distance, this green line laser still keeps works with extremely clear and fine line indication in multiple application fields, covering laser cutting, laser car wheel alignment, sawmill, lumber machine, laser medical therapy, military targeting and high Tech work, etc.
Within freely installed distance of three meters, even though some of working surfaces are not easy to reach, this 532nm green laser line generator still makes sure of the most convenient installation and the easiest reaching of green line source onto any vertical or horizontal work surface. It makes sure of no track, no mistake and long lasting green line indication in continuous use. When it makes proper line generation within the maximum work distance of 25 meters and other high lighting working occasions, after high attention to any thermal energy hurt to human eyes and correct wearing of laser safety glasses, without any an eye exposure to laser beam aperture, this industrial green alignment laser just makes sure of easy and secured green line indication in long lasting use effectively

Whenever you have made a decision to make highly precise and highly clear dot indication at various work distances, it is not easy to reach with any manual or mechanical dot alignment tool at all. However, under constant technical innovation of 650nm red laser diode tech, it is not simply made into a red laser pointer, but being made with even more practically used device of a 650nm red laser diode module. Under operation with constant power source supply and easy mounting onto any other machine or device, not relying on any manual labor force input or prior dot positioning work, these red dot lasers has just achieved high intensity red laser beam emission and highly clear red dot indication at various work distances constantly.

The usual use of a 650nm red laser diode module has to work for a quite a long time. being made with an import red laser died within 5mW to 100mW. This red dot laser is cooperating with a metal heat sink cooling system. In practical precise dot alignment work is always working well with superior nice thermal stabilization. As a result, when it makes constant dot indication within eight to ten hours per day, after leaving enough space and time for tube cooling down, this red dot laser has just achieved excellent laser light cycling use and highly reliable red dot indication for both long lasting and long distance use.

Being made with a qualified glass coated lens inside the durable aluminum alloy housing tube, in order to assure of clear and no decay light dot indication, this 650nm red laser diode module has just passed through a series of strict laser beam stability test and aging preventing test up to 24 hours. Whatever kind of working surface it is pointing, it is working well with high transmittance red laser light emission and highly clear red dot indication at various work distances. Besides the use of formal close distance and inner room, the use of red dot laser up to 50mW to 100mW has just made highly precise and clear dot projection within the maximum work distance of 25 meters far away.

Under operation with 16mm and 26mm diameter tube design, whatever kind of working surface it is pointing, this 650nm red laser diode module always leaves enough space for tube cooling down and achieves highly reliable red dot indication within daily operating time of eight to ten hours in total. It just allows proper use but skilled users or professionals. Within constant work time of eight to ten hours per day, it keeps works with excellent laser light cycling use and highly reliable red dot indication for both long lasting and long distance use.

It is just operating easy as an accessory part, which is providing users excellent dot alignment source for Las show, laser marking, military targeting, drilling system and high Tech work etc.

Whatever kind of working process it is pointing only to the special use of APC, ACC driving circuit board design, within wide range out output power of 5mW to 100mW, this 650nm red laser diode module is working well with constant output power and electric current. It enables the most reliable dot indication and no tube burning out or damage in proper use. When it achieves long serving lifetime of 8000 hours in total, owing to its no track, no mistake and no barrier dot indication, this alignment laser just gets more and more applications in current time of industrial and high Tech fields. When it gets high power up to 50mW to 100mW in constant use, it is just a key issue to wear correct laser safety goggles and avoid an exposure to laser beam apart so as to assure easy and secured red dot indication for long lasting and long distance use effectively.