What is the best solution for you to make clear and fine enough line indication? It might be processing at different work distances and other hard reaching places. Those of primary use of manual or mechanical alignment tools are far enough to reach. As a result, under constant technical innovation of 532nm green DPSS laser system and a qualified glass coated lens with wide fan angles, it consists of a 532nm green laser line generator. Under conditions that it makes constant power supply and proper installation onto any other machine or device, this 532nm green laser module just makes sure of extremely clear and fine green line indication at various work distances effectively.
The genuine line alignment work with a 532nm green laser line generator would be working for a quite long time. From the very beginning use, it is adopting an inner part of a metal heat sink cooling system inside durable anodized aluminum alloy housing tube. Available with wide range output power of 5mW to 100mW, as a result, according to the adoption of 16mm diameter tube for low power range of 5mW to 100mW, and 26mm diameter tube for high power green laser up to 30mW to 100mW, this 532nm green laser module always leaves enough space and time for tube cooling down and achieves the most reliable green laser beam and green reference line generation within daily operating time of ten hours in use.
Being made with a qualified glass coated Lens with wide fan angles of 10 to 110 degrees, whatever kind of working surface it is pointing, owing to its wide range fan angles of 10 to 110 degrees, this 532nm green laser line generator just projects different line lengths within 0.5 to 6 meters in use. It gets the lowest laser bean divergence and the special Tem00 laser beam mode. As a result, no matter line alignment work is processing at close or long distance, this green line laser still keeps works with extremely clear and fine line indication in multiple application fields, covering laser cutting, laser car wheel alignment, sawmill, lumber machine, laser medical therapy, military targeting and high Tech work, etc.
Within freely installed distance of three meters, even though some of working surfaces are not easy to reach, this 532nm green laser line generator still makes sure of the most convenient installation and the easiest reaching of green line source onto any vertical or horizontal work surface. It makes sure of no track, no mistake and long lasting green line indication in continuous use. When it makes proper line generation within the maximum work distance of 25 meters and other high lighting working occasions, after high attention to any thermal energy hurt to human eyes and correct wearing of laser safety glasses, without any an eye exposure to laser beam aperture, this industrial green alignment laser just makes sure of easy and secured green line indication in long lasting use effectively

Whenever you have made a decision to make highly precise and highly clear dot indication at various work distances, it is not easy to reach with any manual or mechanical dot alignment tool at all. However, under constant technical innovation of 650nm red laser diode tech, it is not simply made into a red laser pointer, but being made with even more practically used device of a 650nm red laser diode module. Under operation with constant power source supply and easy mounting onto any other machine or device, not relying on any manual labor force input or prior dot positioning work, these red dot lasers has just achieved high intensity red laser beam emission and highly clear red dot indication at various work distances constantly.

The usual use of a 650nm red laser diode module has to work for a quite a long time. being made with an import red laser died within 5mW to 100mW. This red dot laser is cooperating with a metal heat sink cooling system. In practical precise dot alignment work is always working well with superior nice thermal stabilization. As a result, when it makes constant dot indication within eight to ten hours per day, after leaving enough space and time for tube cooling down, this red dot laser has just achieved excellent laser light cycling use and highly reliable red dot indication for both long lasting and long distance use.

Being made with a qualified glass coated lens inside the durable aluminum alloy housing tube, in order to assure of clear and no decay light dot indication, this 650nm red laser diode module has just passed through a series of strict laser beam stability test and aging preventing test up to 24 hours. Whatever kind of working surface it is pointing, it is working well with high transmittance red laser light emission and highly clear red dot indication at various work distances. Besides the use of formal close distance and inner room, the use of red dot laser up to 50mW to 100mW has just made highly precise and clear dot projection within the maximum work distance of 25 meters far away.

Under operation with 16mm and 26mm diameter tube design, whatever kind of working surface it is pointing, this 650nm red laser diode module always leaves enough space for tube cooling down and achieves highly reliable red dot indication within daily operating time of eight to ten hours in total. It just allows proper use but skilled users or professionals. Within constant work time of eight to ten hours per day, it keeps works with excellent laser light cycling use and highly reliable red dot indication for both long lasting and long distance use.

It is just operating easy as an accessory part, which is providing users excellent dot alignment source for Las show, laser marking, military targeting, drilling system and high Tech work etc.

Whatever kind of working process it is pointing only to the special use of APC, ACC driving circuit board design, within wide range out output power of 5mW to 100mW, this 650nm red laser diode module is working well with constant output power and electric current. It enables the most reliable dot indication and no tube burning out or damage in proper use. When it achieves long serving lifetime of 8000 hours in total, owing to its no track, no mistake and no barrier dot indication, this alignment laser just gets more and more applications in current time of industrial and high Tech fields. When it gets high power up to 50mW to 100mW in constant use, it is just a key issue to wear correct laser safety goggles and avoid an exposure to laser beam apart so as to assure easy and secured red dot indication for long lasting and long distance use effectively.

Unless the use of any manual line drawing work, it is not easy to reach with any manual labor force input, it is making good job to operate a high brightness device of 445nm blue line laser module. It keeps work with intense and moderate brightness blue laser light emission directly from a 445nm blue laser diode. Being made with qualified separate crystal lens with different fan angles and constant power source supply, not any longer limited by long distance, high height and other hard reaching places etc, this blue laser line generator just assures highly clear and long lasting line generation for all raw material processing works constantly.
The real line alignment work with 445nm blue line laser module is continuing for quite long time. It is a key issue to assure its stable and no decay light line indication. The special use of a metal heat sink cooling system gets even better thermal emitting than formal air or water cooling system. Being made with 16mm diameter anodized aluminum alloy housing tube, this direct diode emission made blue laser line generator still gets enough space for tube cooling down, and achieves highly stable and reliable blue line indication within long lasting time of 8 to 10 hours per day.
According to the use of separate crystal lens, whatever kind of working surface it is pointing, this blue line laser module is projecting non Gaussian distribution blue laser light and highly uniform blue line projection in distance. It is generating the same line brightness from middle part towards both ends, and also assuring no decay light in long lasting use. It gets as fine as 0.3mm line fineness at 10cm, 1mm to 2mm fineness at 2 meters. In occasion that blue laser line generator is working within the maximum work distance of 25 meters, it always keeps work with highly fine and clear line indication onto a lot of raw material surfaces.
With the assistance of a laser alignment mounting bracket and extending electric wires, within freely installed distance of 3 meters, this ultra compact size tube made blue line laser module makes sure of the most convenient installation, and easy reaching of blue line emission onto any raw material surface. It just assures noncontact, no barrier and no mistake line generation in distance. When blue alignment laser makes freely adjusted line fineness and line emitting direction, only after high attention to laser safety issue and correct wearing of 445nm wavelength preventing laser safety goggles, it just assures easy reaching and no danger use in all occasions.