Whenever line generation work is processing at close a long distance, even though it is far more enough than hand reaching, it still makes a good job for users to operate a highly precise beam emitting device of 635nm red line laser module. It is applicable for those of industrial and high Tech precise line generation work fields. Under operation with constant power source supply and easy connects with DC power supply and easy mounting onto any other industrial devices or equipment, it begins to work with high precision, high fineness and long lasting red line generation onto a lot of working surfaces.
The usual use of a 635nm red line laser module just continues for a quite long time. The basic adoption of a metal heat sink cooling system gets even better thermal inviting performance than formal air or water cooling. When it gets proper use of 16mm and 26mm diameter tube design, only if there is enough space leaving for tube cooling down, it achieves excellent laser light cycling use and highly reliable red line indication within daily operating time of eight to ten hours per day.
Owing to the use of a high quality glass coated Lens and a glass window inside the different dimension metal housing tube, this 635nm red line laser module also gets wide range output power of 5mW to 100mW. Only if there is enough space leaving for tube cooling down and makes continuous line generation within daily operating time of eight to ten hours, this laser line generator has just got high level of laser cycling use and highly reliable red line indication as expected.
According to the adoption of a quite qualified glass coated lens with wide fan angles of 10 to 110 degrees, whatever kind of working surface it is pointing, it always enables wide range for angles of 10 to 110 degrees. It projects highly straight and high quality red line source within 0.5 to 6 meters. Under conditions that users are getting basic learning of required line length and line fineness at different work distances, after its correct use of out power and optic lens fan angle, this accessory part of laser line generator just enabled the easy installation onto any other machine or device, and provides users ideal line alignment solution for laser cutting, saw mill, lumber machine, laser car wheel alignment, laser medical therapy, military targeting and high Tech work, etc.
Under operation of electric wire extension for both 635nm red line laser module and DC power supply, it enables the most convenient installation and the easiest reaching of red line source onto any vertical or horizontal working surface. The special use of laser safety goggles just protect human eyes from the use of high power red alignment laser up to 50mW to 100mW. Anytime users are selecting correct output power and optic Lens fan angle made laser device, it just makes sure of easy and secured line generation in long lasting use effectively.

What is the best solution for you to make clear and fine enough line indication? It might be processing at different work distances and other hard reaching places. Those of primary use of manual or mechanical alignment tools are far enough to reach. As a result, under constant technical innovation of 532nm green DPSS laser system and a qualified glass coated lens with wide fan angles, it consists of a 532nm green laser line generator. Under conditions that it makes constant power supply and proper installation onto any other machine or device, this 532nm green laser module just makes sure of extremely clear and fine green line indication at various work distances effectively.
The genuine line alignment work with a 532nm green laser line generator would be working for a quite long time. From the very beginning use, it is adopting an inner part of a metal heat sink cooling system inside durable anodized aluminum alloy housing tube. Available with wide range output power of 5mW to 100mW, as a result, according to the adoption of 16mm diameter tube for low power range of 5mW to 100mW, and 26mm diameter tube for high power green laser up to 30mW to 100mW, this 532nm green laser module always leaves enough space and time for tube cooling down and achieves the most reliable green laser beam and green reference line generation within daily operating time of ten hours in use.
Being made with a qualified glass coated Lens with wide fan angles of 10 to 110 degrees, whatever kind of working surface it is pointing, owing to its wide range fan angles of 10 to 110 degrees, this 532nm green laser line generator just projects different line lengths within 0.5 to 6 meters in use. It gets the lowest laser bean divergence and the special Tem00 laser beam mode. As a result, no matter line alignment work is processing at close or long distance, this green line laser still keeps works with extremely clear and fine line indication in multiple application fields, covering laser cutting, laser car wheel alignment, sawmill, lumber machine, laser medical therapy, military targeting and high Tech work, etc.
Within freely installed distance of three meters, even though some of working surfaces are not easy to reach, this 532nm green laser line generator still makes sure of the most convenient installation and the easiest reaching of green line source onto any vertical or horizontal work surface. It makes sure of no track, no mistake and long lasting green line indication in continuous use. When it makes proper line generation within the maximum work distance of 25 meters and other high lighting working occasions, after high attention to any thermal energy hurt to human eyes and correct wearing of laser safety glasses, without any an eye exposure to laser beam aperture, this industrial green alignment laser just makes sure of easy and secured green line indication in long lasting use effectively

What is the best job to make the most precise line alignment? It is processing at quite long work distance, not easy to reach with primary manual line drawing or printing work, it is always making even better job with a direct diode emission made device of 445nm blue line laser module. Being made with an import 445nm blue laser diode and qualified separate crystal lens inside a highly durable metal housing tube, configured with constant power source supply, it always makes sure of high density blue laser light emission and highly clear and fine blue line projection at long work distance effectively.
The genuine use of a 445nm blue line laser module is always continuing for a quite long time. Comparing with a simple blue laser pointer only used for temporary positioning work, it is getting even better thermal emitting. For instance, according to the use of an import 445nm blue laser diode and metal heat sink cooling system are cooperating well, which is working well with at least 40% improvement of laser beam stability in continuous use. Every time it is operating within wide range operating temperature and other harsh occasion, such as serious mechanical moving or calibration etc, this laser line generator still gets superior nice environmental stabilization, and highly reliable blue line projection within long lasting use.
Whatever kind of working surface it is pointing, owing to the special use of a separate crystal lens within 10 to 93 degree, this blue line laser module is projecting the best quality non Gaussian distribution blue laser light, and highly uniform blue line projection. It is working well with the same line brightness from middle part towards both ends, and no laser light decay or fade in continuous use. When it is pointing onto various working surfaces, only after its basic measurement and experiment of technical data, this laser line generator gets correct use of output power and optic lens degree, and assures extremely clear blue line generation for a lot of raw material processing works.
According to special use of electric wires for both 445nm blue line laser module and DC power supply, it always enables the maximum installed distance of 3 meters, easy and quick reaching of blue line projection onto a lot of working surfaces. Every time it makes freely adjusted laser line fineness and line projecting direction within three dimensions, after correct wearing of laser safety goggles and avoiding eye exposure to laser beam aperture, this industrial alignment laser just assures easy reaching and highly secured line generation in all application fields perfectly.