What is the best job for users to make ultra clear line indication at long work distance? Even though it is far more enough than formal hand reaching, however, it should be a quite nice beginning for users to operate a high brightness device, such as a 532nm green line laser module. It always emits highly visible green laser light from a middle wavelength 532nm green DPSS laser system. On condition that it gets ultra low laser beam divergence and quite special laser beam mode of TEM00, either it is pointing at close or long distance, this laser line generator is able to provide users quite satisfied green line indication for all machinery processing works. 
On the basis of AC/DC adapter, not any longer spending extra time on alkaline battery power source, the real use of a 532nm green line laser module is able to make continuous green laser beam and green line indication for a lot of raw material processing works. It applies advanced 532nm green DPSS laser tech within wide range output power of 5mW to 100mW. Besides its use for close distance and inner room, unless it is pointing under sunlight, this green laser line generator is able to make highly clear and quick response line indication for those of industrial and high tech precise line positioning works effectively.
According to the unique design of a qualified glass coated lens within wide fan angles of 10 to 110 degree, in order to assures its clear line projection for a lot of work fields, this 532nm green line laser module should be work with strong environmental stabilization. As a result, when it passes through a series of strict laser beam stability test and aging preventing test, once it is operating by skilled users, this laser line generator is able to make ultra stable and reliable green line projection for a lot of working occasions, including laser cutting, saw mill, lumber machine, textile garment processing and lab experiment work etc.
Being made with different dimension metal housing tube for different output power, this 532nm green line laser module allows quite easy mounting onto any other machine or device. Any time it makes freely adjusted laser beam focus, after its immediate laser light concentration, this alignment laser enables highly efficient conversion of increasing brightness and fineness green line projection at longer distance. For the most important of all, when it gets high power up to 50mW to 100mW, it is always a key issue to pay high attention to laser safety issue and wear correct laser safety glasses until achieving easy, secured and long lasting line indication for all work fields effectively.

Any time users are trying to make ultra clear and fine enough line projection at different work distance, although it is not able to rely on any manual labor force input at all, it still makes a quite satisfied line positioning results for a lot of industrial and high tech precise line positioning work fields. Being made with advanced 532nm green DPSS laser system and a qualified glass coated lens inside a durable metal housing tube, it is created into a quite practically used device of a 532nm green line laser module. It is working well with high fineness and high fineness green line projection with different line lengths. On condition that it makes proper installation and adjustment to correct position, this laser line generator brings users the best line alignment experience for all precise machinery processing works. 
When 532nm green line laser module is used for those of industrial and high tech precise line measuring work fields, it is in need to generate different line length and line fineness at various work distances. Thus it applies a qualified glass coated lens within wide fan angles of 10 to 110 degree. In process of long lasting and long distance precise line positioning work fields, owing to its strict laser beam stability test and aging preventing test up to 24 hours, it is always maintaining ultra stable and reliable green reference line projection. This 532nm green laser line generator also enables proper use by professionals and engineers, and also maintains up to 85% laser beam stability after its constant green line projection work within 10 hours per day.
In a large variety of industrial and high tech precise line positioning work fields, after basic learning of required line length, line fineness and work distance, this 532nm green line laser module enables correct use of output power and optic lens fan angle. It is operating easily as an accessory part, which is able to make highly clear line indication for multiple working occasions, including laser cutting for stone, wood, metal, garment, saw mill, lumber machine, textile garment processing and lab experiment work etc. 
Being made with ultra compact size metal housing tube design, together with electric wires extension for both of 532nm green line laser module and DC power supply, it always enables quite easy installation, quick reaching of green reference line projection onto any vertical or horizontal surface. The unique design of APC, ACC driving circuit board just protects green alignment laser from tube burning out or damage, and assures long lasting green line projection for all working occasions. When users are taking active laser safety measure and wearing proper laser safety glasses, it still brings users easy, free and no danger line alignment for all working occasions effectively. 

Once you are falling into serious need of long lasting and long distance line generation at a quite long work distance, it might be far more enough than your hand reaching. However, it is not any longer a hard job for users until selecting a quite practical used device, such as a 532nm green laser line generator. Among all kinds of visible laser devices, it gets the advanced use of a middle wavelength among visible optical spectrum. as a result, once it gets the lowest laser bean divergence and the most special TEM00 laser beam mode, the finished product of 532nm green laser module has just assured the best quality green laser light source emission and the most precise green reference line indication on multiple working surfaces effectively.
In process of continuous line positioning work, 532nm green laser line generator should have to work with stable and reliable performance as expected. The unique use of a metal heat sink cooling system just gets even better thermal emitting than air or water cooling. It is getting wide range output power of 5mW to 100mW. After configuration with high duration anodized aluminum alloy housing tube, this 532nm green laser module just adopts different dimension tube diameter design of 16mm and 26mm. When it gets enough space leaving for tube cooling down, after its continuous line generation work within ten hours per day, it just achieves enough space and time for tube cooling down and enables highly reliable green line indication on to multiple raw material surfaces effectively. 
The usual use of a qualified glass coated Lens enables freely selected fan angles within 10 to 110 degrees. Under operation with a series of strict laser beam stability and aging preventing test up to 24 hours, this 532nm green laser line generator is achieving high level of laser light cycling use and highly reliable green line projection within daily operating time of ten hours per day. It projects has different line lengths within 0.5 to 6 meters in continuous use. It is just a necessity for users to get basic measurement and experiment of required technical data. Within the maximum work distance of 25 meters and other multiple highlighting working occasions, only after its correct use of output power and optic lens fan angle, this 532nm green laser module is providing users excellent line positioning results for multiple fields including guideline for laser cutting, saw mill, lumber machine, laser car wheel alignment, military targeting and high Tech work, etc.
According to the easy use of laser alignment mounting bracket, together with electric wires extension for both 532nm green laser line generator and DC power supply, it always enables the most convenient installation and the easiest reaching of green line source onto any vertical or horizontal work surface. It makes sure of non contact, no mistake and low cost line positioning results. As a result, once it gets high power up to 50mW to 100mW, it is just a necessity to pay high attention to laser safety issues and wear correct laser safety glasses until achieving easy and secured alignment laser generation on all occasions effectively.